16) Rfid Related Error (Error 610-613) - Oki C3400n Maintenance Manual

7.5.2.(16) RFID Related Error (Error 610-613)

(16-1) A toner cartridge not installed
Confirmation Items
(16-1-1) Check attachment of the tag
Attachment status of the
RFID tag
(16-1-2) Check mode of toner cartridges
Starter toner
mode (STC)
or
Normal toner cartridge
mode (NTC)
(16-2) Detection of an OKIDATA toner cartridge of different type
Confirmation Items
(16-2-1) Check for a toner cartridge of different type
Check the toner cartridge
(16-3) Detection of a non-OKIDATA toner cartridge
Confirmation Items
(16-3-1) Check for a non-genuine toner cartridge
Check the toner cartridge
(16-4) RFID communication error
Confirmation Items
(16-4-1) Check the connection
Check the connection of
the RFID PCB
43163501TH Rev. 1
Confirm that genuine toner cartridges with a tag
attached are used.
cartridge Print out the menu map by continuation of operation by
opening/closing the cover restoring the power, and
check STC mode/NTC mode and installation of
STC/NTC.
Check the menu map for the following values.
ET: · · · · · · · · · · · · · · · · *
KYMC-****
Every toner cartridge is in STC mode when the least
significant digit of ET is F, or in NTC mode when 0.
Every toner cartridge is in STC when the KYMC value is
0000, or in NTC mode when 1111.
If STC is installed in NTC mode, the non-installation
error occurs.
Check the status monitor for error details.
Error: 554-557, 614-617, 620-623
Check the status monitor for error details.
Error: 550-553
Check the connection of it to the BLA (main) board, the
LUM (RFID reader writer) board, and the POL (RFID
antenna PCB) board.
Confirmation Tasks
Confirmation Tasks
Confirmation Tasks
Confirmation Tasks
Oki Data CONFIDENTIAL
Action at NG
Replace with a
genuine spare toner
cartridge that is not
the starter toner
cartridge.
Replace with a
genuine spare toner
cartridge that is not
the starter toner
cartridge.
Action at NG
Replace with a
usable genuine
spare toner cartridge
that is not a starter
toner cartridge.
Action at NG
Replace with a
usable genuine
spare toner cartridge
that is not a starter
toner cartridge.
Action at NG
Reconnect the
poorly connected
cable. If the same
error occurs in
rechecking, replace
the LUM board
and/or BLA board.
159 /