Table of Contents
Advertisement
Drive guidelines
When adding drives to the server, observe the following general guidelines:
•
The system automatically sets all device numbers.
•
If only one drive is used, install it in the bay with the lowest device number
10).
•
To provide the greatest storage space efficiency when drives are grouped together into the same drive
array, drives must be the same capacity.
Installing a hot-plug drive
Remove the drive blank.
1.
Prepare the drive.
2.
Install the drive.
3.
Determine the status of the drive from the drive LED definitions
4.
10).
("Drive
numbering" on page
("Hot-plug drive LED
definitions" on page
Hardware options installation 30
Advertisement
Table of Contents
