Functions Supported In Software Version; And 1.2 - Sony TRIMASTEREL BVM-F250 Operation Manual

Functions Supported in Software Version 1.1 and 1.2
The following new functions are supported for Version 1.1 and Version 1.2 of the BVM-F250/F170.
Software Version 1.1
Menu
1)
• Auto
(in the Color Temp Adj menu of the Adjustment menu)
2)
• Copy From
(in the Picture Adj menu of the Adjustment menu)
(in the Color Temp Adj menu of the Adjustment menu)
(in the Channel Configuration menu)
(in the Marker Setting menu of the Function Setting menu)
(in the File Management menu)
• DisplayPort
(in the Format menu of the Channel Configuration menu)
(in the RGB Range menu of the Channel Configuration menu)
• HDMI/DisplayPort Auto
(in the Matrix menu of the Channel Configuration menu)
(in the RGB Range menu of the Channel Configuration menu)
• HDMI/DP Status
(in the System Status menu)
• Over Range
(in the On Screen Set menu of the System Configuration menu)
2)
• Save To
(in the File Management menu)
2)
• Delete
(in the File Management menu)
1) This function is equipped with BVM-F170 only.
2) Use the controller with software version 1.6 or higher to use this function.
Software Version 1.2
Menu
• ECO lamp
• DisplayPort Upgrade
(in the Monitor Upgrade menu of the System Configuration
menu)
• ENTER button on the controller
3) Use the controller with software version 1.7 or higher to use this function.
Supported function
Automatic color temperature adjustment can be performed using the
built-in color sensor.
Data in this monitor, in another monitor or in a "Memory Stick" can be
copied.
The settings for the DisplayPort signal are available.
Matrix switching (Matrix) and quantization range setting (RGB Range)
for the HDMI or DisplayPort signal are available.
The information of the HDMI and DisplayPort signals can be
displayed.
The zebra pattern can be displayed on the portion of image that
exceeds the allowable range of the internal signal processing circuit.
Stores the system data to a "Memory Stick".
Deletes a file in the "Memory Stick".
Supported function
Indicates the power consumption status of the monitor by the color of
the lamp.
DisplayPort data can be upgraded.
3)
The functions assigned to the function buttons on the controller can
be displayed collectively.
Functions Supported in Software Version 1.1 and 1.2
61