Hilti TE 30 Operating Instructions Manual
Hide thumbs
Also See for TE 30:
- User manual ,
- Operating instructions manual (261 pages) ,
- Manual (228 pages)
Related Manuals for Hilti TE 30
Summary of Contents for Hilti TE 30
- Page 1 TE 30 / TE 30-AVR / TE 30-C-AVR / TE 30-M-AVR Bedienungsanleitung Operating instructions Mode d’emploi...
-
Page 5: Table Of Contents
ORIGINAL OPERATING INSTRUCTIONS TE 30 / TE 30 AVR / TE 30 C AVR / TE 30 M AVR rotary hammer 1 These numbers refer to the corresponding illustra- It is essential that the operating instructions tions. The illustrations can be found on the fold-out are read before the power tool is operated cover pages. -
Page 6: Description
Make a note of this data in your operating instructions and always refer to it when Wear eye Wear a hard Wear ear Wear making an enquiry to your Hilti representative or protection protection protective service department. gloves... - Page 7 To avoid the risk of injury, use only genuine Hilti accessories and insert tools. Observe the information printed in the operating instructions concerning operation, care and maintenance.
- Page 8 2.9 Lubrication Oil lubrication 2.10 Active vibration reduction (TE 30 AVR, TE 30 C AVR, TE 30 M AVR) The power tool is equipped with an AVR active vibration reduction system which reduces vibration significantly compared to power tools without AVR.
-
Page 9: Insert Tools, Accessories
3. Insert tools, accessories Insert tools and accessories for the TE 30, TE 30 AVR, TE 30 C and TE 30 M Chuck TE C (SDS Plus) Chuck TE T (SDS Top) Hammer drill bits 5…25 mm TE C percussion core bits 66…90 mm... - Page 10 90 dB (A) Uncertainty for the given sound level as per EN 60745 3 dB (A) Additional information in accordance with EN 60745 Triaxial vibration value for the TE 30 (vibration vector measured in accordance with EN 60745-2-6 sum) Hammer drilling in concrete, a 16.5 m/s...
-
Page 11: Safety Instructions
Other information about the power tool Chuck TE C (SDS plus) / TE T (SDS Top) Drilling dia. range in concrete/masonry (hammer 5…28 mm drilling) Percussion core bits 66…90 mm Drilling dia. range in wood: solid bits 5…20 mm Drilling dia. range in metal Max. - Page 12 e) Do not overreach. Keep proper footing and bal- parts. This will ensure that the safety of the power ance at all times. This enables better control of tool is maintained. the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or 5.2 Additional safety precautions jewellery.
- Page 13 Hilti for wood dust and/or outlet. Damaged supply cords or extension cords mineral dust together with this tool. Ensure that present a risk of electric shock. the workplace is well ventilated. The use of a c) Dirty or dusty power tools which have been dust mask of filter class P2 is recommended.
-
Page 14: Before Use
6. Before use 2. Release the side handle clamping band by turning the handle counterclockwise. 3. Slide the side handle clamping band over the chuck and onto the cylindrical section at the front end of the power tool. 6.1 Fitting the side handle 2 4. - Page 15 “Drilling without hammering” posi- and then release the sleeve. tion (TE 30 M AVR 1st and 2nd gear) . 4. Rotate the chuck until it is heard to engage. 2. Bring the side handle into the desired position and check that it is fitted correctly and secured.
-
Page 16: Care And Maintenance
7.2.4.2 Locking the chisel (TE 30 C AVR, 7.2.4 Chiseling (TE 30 C AVR, TE 30 M AVR) TE 30 M AVR) NOTE 1. Turn the function selector switch until it engages in the “Chiseling”... -
Page 17: Troubleshooting
8.3 Maintenance faultlessly. If necessary, the power tool should be WARNING repaired by Hilti Service. Repairs to the electrical section of the power tool may be carried out only by trained electrical spe- 8.4 Checking the power tool after care and cialists. -
Page 18: Disposal
10. Disposal Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or Hilti representative for further information. -
Page 19: Ec Declaration Of Conformity
12. EC declaration of conformity Hilti Corporation Designation: Rotary hammer Type: TE 30 / TE 30 AVR / TE 30 C AVR / TE 30 M AVR 2008 Year of design: Dietmar Sartor Jan Doongaji We declare, on our sole responsibility, that this... - Page 20 Fax: +423 / 234 29 65 www.hilti.com 402495 / A Hilti = registered trademark of Hilti Corp., Schaan W 3644 0209 00-Pos. 1 1 Printed in Liechtenstein © 2009 Right of technical and programme changes reserved S. E. & O.
Need help?
Do you have a question about the TE 30 and is the answer not in the manual?
Questions and answers