Proaction VC9340S-6 Instruction Manual page 9

CLEANING THE FILTERS
Changing And Cleaning The Pre-
motor Filter
IMPORTANT:
Never use the appliance without
the motor filter protection and
exhaust filter installed, otherwise
damage to the product may
occur which would not be
covered by the guarantee.
NOTE: Failure to keep the filters
clean, will result in a loss of
performance.
1. Unplug the Cleaner from the mains.
2. Remove the Dust Tank from the
unit.
See fig. 23.
3. Remove the Pre-Motor Filter Y
and clean in warm soapy water.
Ensure the Filter is totally dry
before assembly.
See fig. 24.
4. Reinsert the Filter and Dust Tank.
NOTE:
Inserting wet filters into the
machine will create an electrical
hazard.
14
Changing And Cleaning The
Exhaust Filter
1. Unplug the Cleaner from the mains.
2. Remove the Filter Cover from the
3. Remove the Exhaust Filter Z from
fig. 23
4. Reinsert the Filter and Cover.
Y
NOTE: We recommend cleaning
fig. 24
CLEANING THE FILTERS
unit.
See fig. 25.
the Filter Holder. Then clean in
warm soapy water. Ensure the
Exhaust Filter Z is totally dry
before assembly.
See fig. 26.
See fig. 26.
the Pre-Motor Filter and
Exhaust Filter at the same time
at regular intervals.
NOTE:
Inserting wet filters into the
machine will create an electrical
hazard.
Filter Cover
fig. 25
fig. 26
Z
Filter Holder
Filter Cover
15