Proaction VC9340S-6 Instruction Manual page 8

CLEANING THE FILTERS
3. Vigorously tap the HEPA Filter X
on a hard surface until no more
dust is can be seen falling out.
See fig. 18.
Alternatively, the HEPA Filter X
may also be washed by running it
under the tap.
See fig. 19.
We recommend washing the filter
once a week or when suction
appears reduced. Always allow 24
hours for drying before inserting
back into the unit.
NOTE: The white material in the
HEPA filter will discolor over
time. This is NORMAL and will
NOT affect the performance of
the filter.
WARNING: Never overfill the dust
bin . Remove dirt and clean the
HEPA filter each time the dust
bin is emptied. Failure to keep
the filter clean could result in
the motor becoming damaged.
12
CLEANING THE FILTERS
Cleaning the HEPA Filter Frame
1. Press on the Trap Door Release
X
button to open the bottom cover
of the Dust Bin.
See fig. 20.
2. Unlock and remove the Filter
Frame N from the Dust Tank.
See fig. 21.
3. Rinse the frame in lukewarm water
fig. 18
by running it under the tap to
remove any dust that is adhering
to the frame. Do NOT place in
dishwasher.
See fig. 22.
4. Make sure that the filter frame is
completely dry before inserting
back into the dust cup.
fig. 19
X
Trap Door
Release Button
fig. 20
fig. 21
N
fig. 22
N
13