Assembly - Proaction VC9340S-6 Instruction Manual

ASSEMBLY

IMPORTANT:
Please read the important safety
instructions before use.
NOTE:
Always remove the plug from
the mains power before fitting
or removing accessories.
WARNING:
Keep fingers away from the
Rolling Brush and ensure
children do not use this
appliance.
Foldable Handle Release
1. Carefully unpack all components
and set aside packaging.
2. Lift the handle to an upright
position, the handle will lock
automatically.
See fig. 1.
3. To lower, hold Upper Handle A
in one hand and turn the Folding
Handle Release L .
See fig. 2.
4
fig. 1
A
fig. 2
L
ASSEMBLY
Two Hose Ends To The Floor Head
1. Carefully insert the ends of Flexible
Hoses F into the holes on the
Power Head H . When the hose
end is fully inserted, rotate the left
hose anticlockwise and the right
hose clockwise by a small amount.
Ensure they are fixed securely
before turning the power on .
See fig. 3.
NOTE: Before use, both hose ends
must be correctly assembled
otherwise no suction force will
be transferred to the power head.
Cord Storage
1. Make sure that the quick release
Cord Holder K is in the upright
position.
2. Wrap the Power Cord R into place
by wrapping in a clockwise direction
around the Power Cord Holders K .
See fig. 4.
Quick Release Cord Storage
3. Rotate the upper Power Cord
Holder K 180˚ to unwrap the power
cord.
NOTE: Wrapping the cord with
excessive tension could damage
the cord.
WARNING: Ensure the unit is
switched off before plugging into
the mains.
F
fig. 3
K
R
K
fig. 4
F
5