Accessories; Trouble Shooting - Proaction VC9340S-6 Instruction Manual

ACCESSORIES

Fit the accessories to match your cleaning requirements
Crevice Nozzle
Small Brush
Upholstery Brush To clean upholstery, curtains, etc.
Air-driven
TURBO Brush
Power Head
Drive Belt
HEPA Filter
Pre-Motor Filter
Exhaust Filter
20
To vacuum corners and slots.
To clean curtains, etc.
To clean carpets, rugs or smooth
surfaces.
To clean carpets, rugs or smooth
surfaces.
Keep the Drive Belt safe for future
use.
Keep the HEPA Filter safe for future
use.
Keep the Pre-Motor Filter safe for
future use.
Keep the Exhaust Filter safe for future
use.

TROUBLE SHOOTING

PROBLEM POSSIBLE CAUSE
Machine does not 1. Not properly plugged
work.
into mains wall socket.
2. No electricity in mains
wall socket.
3. On/Off switch not
turned on.
4. Motor thermostat
activated.
The Suction 1. Full or clogged dust
performance is cup.
reduced. 2. Wrong pile height
setting.
3. Clogged nozzle or
dust inlet port.
4. Clogged hose.
5. Broken belt.
6. Hose not inserted
fully.
7. Dirty filters.
8. Rubbish blocking "U"
tube.
9. The U Tube Cover is
open.
Cleaner picks up 1. Wrong pile height
moveable rugs or is setting.
hard to push
Agitator does not turn 1. Broken belt.
2. Belt installed incorrectly.
MAINTENANCE FOR PRO-ACTION SPARES CONTACT
08705-143099
CORRECTION
1. Plug in firmly.
2. Check fuse or breaker.
3. Push on/off switch to on.
4. Wait 45 mins for motor
thermostat to reset.
1. Clean dust cup.
2. Adjust setting.
3. Remove obstruction.
4. Remove obstruction.
5. Replace.
6. Push hose in securely.
7. Clean/change filters.
8. Open the cover on the
"U" tube and remove
blockage
9. Turn off the machine and
close the U Tube cover.
1. Adjust setting.
1. Replace belt.
2. Check belt changing and
Cleaning.
21