Operation - Proaction VC9340S-6 Instruction Manual

OPERATION

How to Start
1. Turn the upper Power Cord
Holder K 180˚ to release the
Power Cord R .
See fig. 9.
2. Plug the Power Cord R into the
mains.
3. Depress on the Handle Release
Q pedal to release the handle.
See fig. 9 and 11.
4. Push the On/Off Switch B to the
"On" position to turn the unit on.
See fig. 10.
5. When using the attachments, the
unit must be in the upright
position.
8
K
B
R
Q
fig. 9 fig. 10
fig. 11
OPERATION
Carpet Height Adjustment
- This upright vacuum cleaner can
be used on multiple types of
carpeting, bare floors or upholstery
with attachments. To select a pile
height setting:
1. Turn vacuum cleaner "Off".
2. Release handle to "work" position.
3. Select a pile height setting by
turning the Carpet Height
Adjustment Knob G to the desired
setting.
See fig. 12.
Suggested Pile Height Setting
- You may need to choose a higher
setting to make some jobs easier,
such as vacuuming scatter rugs
and longer pile carpets.
Suggested settings are:
PLUSH (HIGH): shag carpet, long
pile, plush scatter rugs - medium
to long pile.
BARE (LOW): short to medium pile,
bare floors very low pile, bare
floors. Place unit in "PLUSH"
setting when using attachments
to prevent possible floor damage.
ATTENTION: Special care is
required when vacuuming
certain types of carpet or floor
covering. Always check the
carpet or floor covering
manufacturer's recommended
cleaning instructions before
vacuuming.
G
fig. 12
9