Table of Contents
Advertisement
2. Select the (
to record.
3. Select one-hour blocks to add to the recording setup.
4. When you have the schedule set up as you want it, select Apply.
The configuration for that channel is now saved.
5. If you want to use that same configuration on another channel,
select that channel in the dropdown box for Apply Settings To.
Then, select Copy. The configuration is now copied to the second
desired channel.
6. If you want to apply the settings from one channel to ALL
channels, select All in the dropdown box for Apply Settings
To. Then, select Copy. The configuration is now copied to all
channels.
7. Select Apply to save the settings.
8. Select Exit.
Motion Tab
This tab sets up a schedule for motion sensor recording. (Default = All
recording blocks selected)
) icon to set 1-hour blocks you WANT that channel
37
Advertisement
Table of Contents
