Table of Contents
Advertisement
Mask Motion Sensitive Areas
Motion masking sets up areas to be ignored by the motion sensor.
Go to Main Menu/Setup/Alarm/Motion (Motion tab, Area field). The
screen displays a Live view image with a grid overlay. See page 44
for details.
Block Off Areas to Not Record
Video blind blocks off up to 4 areas from recording. Go to Main Menu/
Setup/Live (Video Blind tab). Select the masking area for the camera
you want and a live view of that camera displays. Left-click and drag a
rectangle over the area to block off. See page 32 for details.
Set Up Email Notification and Alert
Go to Main Menu/Setup/Network (Email tab). See page 49 for field
descriptions and details.
Configure Alarms
Go to Main Menu/Setup/Alarms. Select the type of alarm (Sensor,
Motion, Video Loss, or Other Alarm). See page 39 for details.
Create a Recording Schedule
Go to Main Menu/Setup/Schedule. You can set up alarms by a specific
calendar schedule or according to sensor type. See page 36 for
details.
Transfer Recorded Files from the Hard Drive to a USB
Device
Insert a USB drive into the USB port on the BACK of the unit. Go to Main
Menu/Backup. Select the files you want to back up (see page 64 for
details), then select Backup. The files are saved to the USB drive.
18
Advertisement
Table of Contents
