Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
Micro SD Card .......................8 Plug it in, Power On/Off ...................9 Record Mode ...................... 10 Photo Mode ....................... 12 Playback Mode ....................13 Connecting to a PC ..................13 Settings Menu ....................14 Important Information ..................15 Warranty ................16 UNIDEN iGO CAM 325 Vehicle Recorder...
USB Cable • Owner’s Manual • If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. UNIDEN iGO CAM 325 Vehicle Recorder...
Controls & Indicators UNIDEN iGO CAM 325 Vehicle Recorder...
Page 6
Fit the bracket hook of the windshield mount Records sound. Reset If the device fails to operate, try resetting the device. Press the reset button using a fine pen or paperclip. Speaker Infrared LED LED for night vision UNIDEN iGO CAM 325 Vehicle Recorder...
4. Push the suction lock up, until it snaps into place and tighten the locking collar to secure. 5. Gently pull on the mount to make sure it is secure. Suction cups will not stick well on a curved/textured or wet surface. NOTE UNIDEN iGO CAM 325 Vehicle Recorder...
SD card inwards for it to pop out and then pull it out of the slot. Uniden recommends using good quality micro SD cards. Battery Information Although primarily designed for in-car use, the unit can operate from its built- in battery for up to 10 minutes.
Power button to turn it on, or press & hold the Power button to turn it off. Only use the DC car adaptor that comes with your device. Any other adaptor might damage the device. NOTE UNIDEN iGO CAM 325 Vehicle Recorder...
Press twice to display the Settings menu. Press the relevant UP and DOWN keys to scan through the various settings and then press OK to select. Press the MENU button to exit the Menu. UNIDEN iGO CAM 325 Vehicle Recorder...
Page 11
Have the keys sound a tone when you press them. Parking Mode Parking Mode is off by default. You can switch it on to allow G-Sensor to detect strong vibration and start recording for the parked vehicle. UNIDEN iGO CAM 325 Vehicle Recorder...
Exposure Set the brightness sensitivity. Anti-Shake Activate this to reduce the camera shake and capture a better quality image. Date Stamp Enable/Disable the date and time on the image files. UNIDEN iGO CAM 325 Vehicle Recorder...
SD card, and then press OK. Connecting to a PC The iGO CAM 325 can be connected to a PC (using the supplied USB cable). When the unit is connected to the PC, the following options - Mass Storage, PC Camera - are displayed on the unit’s screen.
Set the time to automatically turn off the LCD after the recording starts. Format Use this option to format the SD card Default Setting Use this option to change all the settings back to the default factory settings. Version Firmware Version UNIDEN iGO CAM 325 Vehicle Recorder...
This is due to the light frequency. image Change the light frequency depending on the local power supply. The unit crashes Press and hold the ‘Reset’ button, with a pin, to restart the unit. UNIDEN iGO CAM 325 Vehicle Recorder...
(“Uniden Aust”). Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the iGO CAM 325 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 17
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the address shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
Need help?
Do you have a question about the iGO CAM 325 and is the answer not in the manual?
Questions and answers