Unit Description; Prepare Measurement - Sanitas SBM 03 Operating Instructions Manual

• The appliance should be disposed of accor-
ding to Regulation 2002/96/EC-WEEE (Waste
Electrical and Electronic Equipment). In case
of queries, please contact the municipal authorities
responsible for waste disposal in your area.

3. Unit description

1. Display
2. Memory button M
4
3. START/STOP
4. Battery cover
5. Wrist cuff
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. mmHg unit
5. Measured pulse
6. Pulse icon
7. Number of memory space
8. Inflate/deflate arrow
9. ‚Change battery' icon
10. Cardiac arrhythmia icon
11. WHO classification
2
1
3
11
10
9
8
7 6

4. Prepare measurement

Inserting battery
• Remove the battery cover (left side of the unit).
• Insert two 1.5 V micro batteries (alkaline, type LR
03). Make absolutely sure that you insert the batte-
ries with the correct polarity as marked. Do not use
rechargeable batteries.
• Replace the battery cover carefully.
5
If the ‚change battery' icon
surement
is no longer possible and you must replace all
the batteries.
Note: You will find these markings on
batteries containing harmful substances:
Pb = battery containing lead, Cd = bat-
tery containing cadmium,
Hg = battery containing mercury.
1
Setting date and time
2
It is vital to set date and time. Only in this way is it
3
possible to save and subsequently retrieve your mea-
4
sured values with the right date and time.
5
Time is shown in 24 hour format.
Note: If you hold down ‚M', you can set the values
faster.
13
is displayed, mea-
Pb Cd Hg