Bosch SM Series Instruction Manual page 37

Fault
A different error code is
indicated on the digital
display.
(":‹‚ to ":„‹)
Display flashes.
Refill indicator for rinse-aid
H is lit.
Refill indicator for rinse-aid
H is not lit.
Water is left in the
appliance at the end of the
programme.
Cause
A technical fault has probably
occurred.
Door not closed properly.
No rinse aid.
Refill indicator switched off.
There is still enough rinse aid
available.
Filter system or area under the
filters 1R is blocked.
Program has not ended yet.
Fault, what to do? aus
Remedial action
Switch off appliances with the ON/OFF
switch (. After a short time restart the
appliance.
If the problem recurs, turn off the tap and
pull out the mains plug.
Call customer service and mention the
error code.
Close the door. Ensure that no objects
(utensil, fragrance dispenser) are
protruding over the basket and preventing
the door from closing.
Refill rinse aid.
Activation/deactivation.~ "Rinse aid"
on page 15
Check refill indicator, levels.
Clean filters and area underneath.
Wait until programme ends or reset.
37