Installing Four Sli Tm -Ready Graphics Cards - ASROCK EP2C612 WS User Manual

TM
2.10.3 Installing Four SLI -Ready Graphics Cards
Step 1
Insert one graphics card into the PCIE1
slot, another graphics card into the PCIE3
slot, the third graphics card into the PCIE5
slot and the last graphics card into the
PCIE7 slot. Make sure that the cards are
properly seated on the slots.
Step 2
Connect the auxiliary power source to the
PCI Express graphics card. Please make
sure that both power connectors on the
PCI Express graphics card are connected.
Repeat this step on the three graphics
cards.
Step 3
Align and insert an SLI Bridge Card to the
goldingers of the irst and second graphics
card. Install the second SLI Bridge Card
to the goldingers of the third and fourth
graphics card. Connect the second and
the fourth graphics card with the SLI_
Bridge_3S Card. Make sure the SLI Bridge
Cards are irmly in place.
SLI_Bridge_3S Card
SLI_Bridge SLI_Bridge
2 SLI_Bridge Cards
and a SLI_Bridge_3S Card
42