Safety Information - Williams Sound Digi-Wave DLT 100 2.0 Quick Setup Manual

Hide thumbs Also See for Digi-Wave DLT 100 2.0:
Table of Contents

Advertisement

Safety Information

HEARING SAFETY
CAUTION!
This product is designed to amplify sounds to a high volume. To protect your hearing
and the hearing of others: (1) Make sure the unit is OFF or the volume is turned down
before putting on the earphones, (2) set volume level at the minimum setting you need to
hear, and (3) do not allow children or other unauthorized persons to have access to this
product.
MEDICAL DEVICE SAFETY
CAUTION!
Before using this product with an implantable or other medical device, consult your
physician or the manufacturer of your implantable or other medical device. If you have
a pacemaker or other medical device, make sure that you are using this product in
accordance with safety guideliunes established by your physician or the implantable
device manufacturer.
BATTERY SAFETY
CAUTION!
DLT 100 internal battery pack.
To reduce the risk of fire or burns, do not attempt to open, disassemble, or service the
battery pack. Do not crush, puncture, short contacts or dispose of in fire or water. Do
not incinerate or expose to temperatures above 140F (60C). Replace only with battery
pack designated for this product. Rechargeable Lithium-polymer battery (Li-Po).
Recycle or dispose of properly.
Recycling Instructions
Help Williams Sound protect the environment!
Please do not dispose of equipment or used batteries in the household trash.
Take the equipment to an electronics recycling center or return to the factory.
Take batteries to a retail or community recycling location.
DLT 100 2.0 Digital Transceiver

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Digi-Wave DLT 100 2.0 and is the answer not in the manual?

Table of Contents