Setting The Alarm - INNOVATIVE SLEEP SOLUTIONS SLEEPTRACKER Elite Product Manual

SETTING THE ALARM

To set the ALARM, press the MODE button until you reach the ALARM screen, and then press and hold SET until the
hour digit blinks. Adjust to the desired hour by pressing the buttons on the left. Next, press SET to adjust the minutes
using the same buttons. Then press SET to select AM, PM or 24-hour format. To store these settings, press MODE until
the digits stop blinking. Then press and hold the top left button (GLO) until . To set the alarm on vibrate, press the
GLO button twice until appears. Press GLO three times to set the alarm to both vibrate and ring . Press
GLO four times to turn the alarm off. Note: The beeping that occurs when adjusting SLEEPTRACKER®'s settings can be
shut off by setting the alarm on "vibrate."
, , or both must be on for SLEEPTRACKER® to record data or for the alarm to be activated.
TURNING OFF THE RINGING/VIBRATING ALARM
The alarm will ring and/or vibrate for 30 seconds. To turn it off, press and hold the DOWN button. Press and hold
the GLO button to activate snooze until the default alarm time. (For example, if the ALARM time is 7:00 AM with
a 20-minute window, the alarm might ring at 6:52 AM, when an interrupted sleep moment occurs. Pressing GLO
causes the alarm to snooze until 7:00 AM.)
8