SETTING THE TIME, DAY AND DATE
To set the Time, Day, and Date, press and hold SET until the date digit blinks. Press the upper-or lower-left buttons
to scroll to the correct date. (Hold the buttons down to scroll more quickly.) Then, press SET again to go to minutes,
seconds, AM/PM/24hour, day, or date. To store your new settings, press MODE until the screen stops blinking.
2) Press these buttons to adjust
SLEEPTRACKER®'s settings.
7
4) Press MODE until the screen
stops blinking to save your
changes.
1) To set the Time, Day, or Date,
press SET until the digits blink.
3) Press SET again to go to year,
month, date, day, minute, hour,
seconds, or AM/PM/24-hour.