Clay Paky SHARPY WASH 330 Instruction Manual

Hide thumbs Also See for SHARPY WASH 330:

Advertisement

INDEX
Page Contents
2
Safety information EN-IT-FR-DE-ES
12
Unpacking and preparation
13
Installation and start-up
14
Control panel
16
Menu setting
23
Maintenance
29
Technical information
29
Cause and solution of problems
30
Channel functions
SHARPY WASH 330
SHARPY WASH 330 PC
INSTRUCTION MANUAL
1
Congratulations on choosing a Clay Paky product
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.
Carefully read this instruction manual in its entirety and keep it
safe for future reference. It is essential to know the information
and comply with the instructions given in this manual to ensure
the fitting is installed, used and serviced correctly and safely.
CLAY PAKY S.p.A. disclaims all liability for damage to the fitting
or to other property or persons deriving from installation, use and
maintenance that have not been carried out in conformity with this
instruction manual, which must always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the
characteristics stated in this instruction manual at any time and
without prior notice.
C61378
C61379

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SHARPY WASH 330 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clay Paky SHARPY WASH 330

  • Page 1 Menu setting CLAY PAKY S.p.A. disclaims all liability for damage to the fitting or to other property or persons deriving from installation, use and Maintenance maintenance that have not been carried out in conformity with this instruction manual, which must always accompany the fitting.
  • Page 2: Safety Information

    EN 62471 This product is intended for the following areas of application: studios, stages, theaters, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting and similar Not suitable for household illumination SHARPY WASH 330...
  • Page 3 The products to which this manual refers comply with the European Directives pursuant to: • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 2004/108/EC - Electromagnetic Compatibility (EMC) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) SHARPY WASH 330...
  • Page 4: Informazioni Di Sicurezza

    2 metri per prevenire rischi fotobiologici alla persona. EN 62471 Il prodotto è concepito per essere utilizzato nei seguenti ambiti: studi, palchi, teatri, esposizioni, fiere, eventi, parchi a tema, locali di intrattenimento, illuminazione architetturale e simili SHARPY WASH 330...
  • Page 5 I prodotti a cui questo manuale si riferisce sono conformi alle Direttive Europee di cui sono oggetto: • 2006/95/CE - Sicurezza delle apparecchiature alimentate in Bassa Tensione (LVD) • 2004/108/CE - Compatibilità Elettromagnetica (EMC) • 2011/65/UE - Restrizione d’uso di determinate sostanze pericolose (RoHS) SHARPY WASH 330...
  • Page 6: Consignes De Sécurité

    à la personne. EN 62471 Le produit est conçu pour être utilisé dans les milieux suivants : studios, scènes, théâtres, expositions, salons, événements, parcs à thème, lieux de divertissement, éclairage architectural et similaires SHARPY WASH 330...
  • Page 7 Les produits auxquels ce manuel se rapporte sont conformes aux Directives Européennes dont ils font l’objet : • 2006/95/CE - Sécurité des matériels électriques de Basse Tension (BT) • 2004/108/CE - Compatibilité Électromagnétique (CEM) • 2011/65/UE - Limitation de l’utilisation de certaines substances dangereuses (RoHS) SHARPY WASH 330...
  • Page 8: Informationen Zur Sicherheit

    Mindestabstand der Projektorlinse vom menschlichen Auge mindestens 2 Meter beträgt, um EN 62471 einer fotobiologischen Gefährdung der Person vorzubeugen Das Produkt wurde für die Verwendung in den folgenden Bereichen entwickelt: Studios, Bühnen, Theater, Ausstellungen, Messen, Veranstaltungen, Themenparks, Unterhaltungslokale, Architekturbeleuchtung oder ähnliches SHARPY WASH 330...
  • Page 9 Gesetzesvorschriften entsorgen/recyceln. Die Produkte, auf die dieses Handbuch sich bezieht, entsprechen den Europäischen Richtlinien, denen sie unterliegen: • 2006/95/EG - Niederspannungsrichtlinie (LVD) • 2004/108/EG - Elektromagnetische Kompatibilität (EMC) • 2011/65/EU - Beschränkung der Verwendung bestimmter gefährlicher Stoffe (RoHS) SHARPY WASH 330...
  • Page 10: Informaciones De Seguridad

    Según la norma riesgos fotobiológicos a la persona. EN 62471 El producto es concebido para ser utilizado en los siguientes ambientes: estudios, palcos, teatros, exposiciones, ferias, eventos, parques temáticos locales de entretenimiento, iluminación de arquitecturas y similares SHARPY WASH 330...
  • Page 11 Los productos a los que se refiere este manual son conformes a las Directivas Europeas de las cuales son objeto: • 2006/95/CE - Seguridad de los equipos alimenticios de Baja Tensión (LVD) • 2004/108/CE - Compatibilidad Electromagnética (EMC) • 2011/65/UE - Restricción del uso de determinadas sustancias peligrosas (RoHS) SHARPY WASH 330...
  • Page 12: Unpacking And Preparation

    UNPACKING AND PREPARATION IST001/001 2 x 183102/805 Lamp 330W (fitted into projector) Packing contents - Fig. 1 LOCKED UNLOCKED PAN Mechanism Lock and Release (every 90°) - Fig. 2 TILT Mechanism Lock and Release (every 45°) - Fig. 3 SHARPY WASH 330...
  • Page 13: Installation And Start-Up

    The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base. Connecting and disconnecting power cable - Fig. 5 SHARPY WASH 330...
  • Page 14: Control Panel

    During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status. It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the key will be cancelled. SHARPY WASH 330...
  • Page 15 All that is needed is to press to momentarily activate the display and thus access the settings. Once the required operations have been carried out, the display will switch off again after a wait time of 30 seconds. Continue SHARPY WASH 330...
  • Page 16: Menu Setting

    Dimmer On Shutter Dimmer Display Shortcut Default Setting Preset User Preset 1 User Preset 2 User Preset 3 Manual Access code Lamp Advanced Test Pan / Tilt Control 1234 Colour Upload Reset Firmware Setup Beam Channel Model Calibration SHARPY WASH 330...
  • Page 17: Setup Menu

    – the current Universe address appears on the display. 2) Use the UP , DOWN , RIGHT keys to set the Universe address. 3) Press to confirm the selection or LEFT to keep the current setting. Continue SHARPY WASH 330...
  • Page 18: Options Menu

    , the current setting appears on the display. 2) Use the UP and DOWN keys to select one of the following settings: 12.5% 50% (default) 87.5% 100% 3) Press to confirm the selection or LEFT to keep the current setting. SHARPY WASH 330...
  • Page 19 - the current settings appear on the display (On or Off). 2) Use the UP and DOWN keys to enable (On) or disable (Off) the decreasing of display brightness. 3) Press to confirm the selection or LEFT to keep current settings. Continue SHARPY WASH 330...
  • Page 20: Information Menu

    (Are you sure?) appears on the display. 3) Select YES to reset partial projectors counter or NO to keep the current setting and return to the top menu level. SHARPY WASH 330...
  • Page 21 Allows the "Network" parameters of the projector to be displayed or: params IP address: Internet Protocol address (two projectors must not have the same IP address) IP mask: 255.0.0.0 Mac address: Media Access Control: the projector’s Ethernet Address Continue SHARPY WASH 330...
  • Page 22: Manual Control

    – a confirmation message appears on the display (Reset calibration to factory default ?). 2) Select YES to reset calibration to factory default or NO to keep the current setting and return to the top menu level. SHARPY WASH 330...
  • Page 23: Maintenance

    1/4 Turn 1/4 Turn Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section. Opening the head covers - Fig. 10. Closing the head covers - Fig. 11. Continue SHARPY WASH 330...
  • Page 24 Take the new lamp out of its package and insert in the fitting. with a clean, dry cloth. CAUTION: Fast lamp ON-OFF cycles (for example 10 minutes ON / 10 minutes OFF) will reduce the lamp life. SHARPY WASH 330...
  • Page 25 • General cleaning of internal parts. • Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky. • General visual check of the internal components, cabling, mechanical parts, etc.
  • Page 26 Lower Side Extraction of the effect modules: Preliminary operations - Fig. 17 SHARPY WASH 330...
  • Page 27 Extraction of the effect modules - Fig. 18 IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 17 and 18 in reverse order. Continue SHARPY WASH 330...
  • Page 28 Battery removal - Fig. 19 This product contains a rechargeable lead-acid or lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 SHARPY WASH 330...
  • Page 29: Technical Information

    CE Marking: Total output Complies with the following European Directives Sharpy Wash 330 - Max 17300 lumens - 2006/95/EC (LVD) Sharpy Wash 330 PC - Max 18200 lumens - 2004/108/EC (EMC) - 2011/65/EU (RoHS). (12.60") Lamp: Lamp system with a short arc burner in a reflector Safety Devices: •...
  • Page 30: Channel Function

    CHANNEL FUNCTION NB: To prevent accidental breakage of the effects, which could collide with each other during transport, SHARPY WASH 330 before switching the projector OFF check that all the projector Channels have been excluded (DMX level = 0 bit).
  • Page 31 PINK + UV FILTER PINK LIGHT GREEN + PINK LIGHT GREEN GREEN + LIGHT GREEN BEAM SHAPER INSERTED GREEN AQUAMARINE + GREEN AQUAMARINE ORANGE + AQUAMARINE ORANGE RED + ORANGE WHITE + RED WHITE BEAM SHAPER EXCLUDED Continue SHARPY WASH 330...
  • Page 32 FROST EXCLUDED • LIGHT FROST - channel 11 EFFECT FROST INSERTED FROST EXCLUDED • ZOOM - channel 12 Operation with option InvertPan (Tilt conventionally represented at 35 bit and option Invert Tilt Off) EFFECT WIDE BEAM NARROW BEAM SHARPY WASH 330...
  • Page 33 LAMP OFF UNUSED RANGE The functions are actived passing through the unused range and staying 5 Operation with option Invert Tilt seconds in necessary level. (Pan conventionally represented at 0 bit and option Invert Pan Off) Continue SHARPY WASH 330...
  • Page 34: Timing Channels

    Pan - Tilt time Pan - Tilt - (Pan fine - Tilt fine) Colour time Colour wheel - CTO Beam time Dimmer - Frost TIME TABLE Seconds Seconds Seconds Seconds Seconds Seconds Full 10.2 10.4 10.6 Follow cue 01/13 SHARPY WASH 330...
  • Page 35 CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A.
  • Page 36 See our catalogue for details of these and more Dirty Rigger products Gradav Hire and Sales Ltd The Power House Elstree Film Studios Shenley Road Borehamwood WD6 1JG Phone 020 8324 2100 FAX 020 8324 2933 email office@gradav.co.uk Web www.gradav.co.uk...

This manual is also suitable for:

Sharpy wash 330 pcC61379C61378

Table of Contents