Webb WER21HW Operator's Manual And Parts List page 7

INSTALL ATTACHMENTS
Please note your lawn mower may have been shipped with the mulching plug already fitted under the rear
grassbox flap.
The mower has four different operating modes.
1. Collecting:
• Ensure that the side cover is closed.
• Fit the grassbox by lifting the rear flap on the mower and hook the front of the box to the shaft on the
mower.
• Lower the flap to lock the grassbox in position.
• When the box is full, the grass will be visible through the viewing window in the top of the box.
• Stop the engine before emptying the grassbox.
2. Rear Discharge:
• Ensure that the side cover is closed.
• With the grassbox removed and the rear flap in the down position, the mower will cut and discharge the
grass from the rear of the machine.
3. Side Discharge:
• Fit the mulch plug to the rear discharge opening of the mower and close the rear flap.
• Lift the cover on the side of the mower and attach the side discharge chute as shown in the diagram.
• The mower will now eject grass from the side discharge chute.
4. Mulching:
• Fit the mulch plug to the rear discharge opening of the mower and close the rear flap.
• Ensure that the side cover is in the closed position (with the discharge chute removed).
• The mower will now recycle the chopped grass into the lawn surface.
• To mulch efficiently only cut one third of the length of the grass.
SET UP YOUR MOWER
•
First attach the lower handles to the mower. Secure the lowest bolt with a wing nut and the other
with a nut.
•
Attach the upper handle to the lower handle with a bolt and a wing nut.
6