Picture - Tatung TME 17 User Manual

PICTURE

Select to display PICTURE submenu. Press "AUTO" key to enter into
the submenu and select the item which you need to adjust. Press "+/-" key
to adjust analog value or state (see below table).
Special Attention
The value adjusted by user, such as Contrast, Brightness, Saturation,
Hue, and Sharpness will be saved automatically by the machine as
personal mode.
Option
Picture Mode Select picture mode
Contrast
Adjust the contrast of whole picture
Brightness
Adjust brightness and blackness of
whole picture
Saturation
Adjust the saturation of whole picture
Hue
Adjust the hue of whole picture
Sharpness Adjust the sharpness of whole picture
Aspect Ratio Select picture scale
Color Temp Select color temperature mode of the
picture
Noise Reduction Select model of 3D NR
Function
"Standard", "Soft", "User", "Bright" four modes.
Increasing analog value increases Contrast;
Decreasing analog value decreases Contrast(0-100).
Increasing analog value increases brightness;
Decreasing analog value decreases brightness(0-100).
Increasing analog value increases color;
Decreasing analog value decreases color (0-100).
Increasing analog value increases green;
Decreasing analog value increases purple(0-100).
Increasing analog value increases definition;
Decreasing analog value decreases definition (0-100).
"Full", "4:3", "Subtitle", "Film" four modes
There are three Color Temperature modes: "Standard",
"Warm", "Cool ".
"Middle", "High", "Off", "Low".
9
Picture Mode Soft
Contrast 48
48
Brightness
Saturation 50
Hue 50
Sharpness 55
Aspect Ratio
Full
Color Temp. Standard
Noise Reduction Off
Adjust Select Menu:Exit
Description