Mamiya RZ67 PRO II Instructions Manual page 9

Film Speed Dial
Used to set the ISO speed of
the film used.
Spool Release Pins
Depress these pins to insert or
remove film.
Film Spool Stud
A new roll of film is loaded on
this stud with the paper leader
pulled over the roller in the
direction indicated by the dotted
line and arrow which appears
around the stud.
Start Mark
The start mark on the backing
paper must be aligned with this
mark.
7
Back Cover Latch
Dark Slide
A safety feature prevents the
shutter from being released
unless the Dark Slide is first
removed. Make it a habit to first
remove the Dark Slide before
attempting to take a photograph.
Lock Release Lever
Use this lever when removing
the roll film holder when the
dark slide has been pulled out.
Holder Lock Lever
Should one inadvertently attempt
to remove the Film Holder without
first inserting the Dark Slide, the
Holder Lock Lever will not unlock,
thereby preventing accidental ex-
posure of the film.
Take-up Spool
After removing an exposed roll
of film, place the empty spool in
this position.