Introduction; In The Case - be bionic steeper Technical Manual

1.0 Introduction

This document contains important information for the correct use and set up of the bebionic small hand. Read this
document thoroughly before fitting a bebionic small hand.
A bebionic system is completed by adding from a selection of compatible system components including electrodes
(or other input devices), battery systems, wrists and cables. We recommend Steeper / SteeperUSA components.
The bebionic small hand is designed for mild to moderate activities. Avoid use in situations with heavy loads, vibrations
or impacts.

1.1 In the case

1. bebalanceBT bluetooth dongle
2. bebionic small hand
3. bebionic small tool kit
4. bebionic small user guide
5. bebionic small technical manual
6. bebalanceBT software CD
7. spare palp box
Key:
WARNING
Text with this symbol contain important
safety information.
WARNING
The bebionic hand contains Electrostatic Sensitive
Devices. Any disassembly on this hand must be
carried out by Steeper authorised personnel in an
Electrostatic Protected Area (EPA). Failure to do
this could cause ESD damage which will affect
the reliability of the product and could impact
product warranty.
4
6.
5.
4.
!
Text with this symbol highlights potential sources
of damage to the hand.
We do not recommend the use of carbon fibre
materials in fabricating a prosthetic arm due
to electrical conductivity. If however it is used
then it is important to ground the carbon fibre
lamination.
3.
1.
7.
CAUTION
WARNING
2.