Table of Contents
Advertisement
5.2 Installation
1.
Close all open applications
2.
Insert the bebalanceBT CD
3.
Wait for Autorun
4.
Follow instructions on screen
The default target directory is C:\Program Files (xXX)\bebalanceBT. You can choose an alternative however it is
essential that the application directory and sub-directories have read and write permission.
If setup fails to automatically open, run it manually from the bebalanceBT V#.#.#.# setup.exe.
If you are reinstalling bebalanceBT, the existing version MUST be uninstalled. Although the existing database will
be retained, it is advisable to back up the previous version before proceeding.
You do not need to uninstall the bebalance software used for bebionic3 and bebionic V2 hands as this will run
seperately from bebalanceBT.
The bebalanceBT application requires .Net Framework 4.0 to operate. If not already installed it can be installed
from the CD by opening dotNet Framework folder and double clicking on 'dotNetFx40_Full_x86_x64.exe'
Similarly, the bluetooth dongle requires software to be installed to operate. Specific versions can be found in the
BLED112 Windows Driver Folder
If using a retro operating system it may be necessary to use software specific to the computer build.
The latest version of the software can be found at
A password is required to download bebalanceBT, contact your local supplier should you require this.
5.3 Start up
On opening the application the main screen shown
above will appear. Any greyed out options are
currently not operational. The area highlighted in
red identifies the bebalanceBT version number and
company information.
24
www.bebionic.com/downloads/bebalanceBT
5.4 Language Selection
On the bottom left of the entry screen you can select
your preferred language: English, French, German,
Spanish, Portuguese, Italian, Turkish, Russian.
Advertisement
Table of Contents
