be bionic steeper Technical Manual page 28

Change Indication
Function change indication is available by selecting
either beep and / or vibrate as highlighted below.
Auto Grip
This feature can be set to enabled or disabled. Please
note that Auto Grip functions in Tripod Grip only.
Auto Grip is activated by providing three consecutive
close signals. Deactivation occurs when the hand
is opened. Reactivation is made again by three
consecutive close signals.
When Auto Grip is active, the electronics monitor
motor position for movement. If movement /
slippage of an object is detected, the finger position
/ grip force is automatically altered to provide a more
secure grip. Electronic monitoring of this process
occurs every 50ms.
28
Horizontal Buttons
Restore Defaults
If at any time you want to start again with your
configuration, clicking Restore Defaults, reverts all the
controls to the default settings for the current mode.
Save
The hand can be configured and the settings sent
to the hand without saving if you want to trial a
configuration.
If you want to retain these settings for further
amendment or back-up click Save. Before the data is
saved a patient identifier must be entered. There is a
description field for recording specific information as
necessary.