Table of Contents
Advertisement
7.
Ensure the fingers and thumb of the hand
align correctly with the fingers and thumb of
the glove.
3.3 Removing the bebionic glove
1.
Firstly oppose the thumb. Then turn the hand
OFF by pressing the program switch for ap-
proximately three seconds. Next put the hand
into glove donning mode by pressing the pro-
gram switch for 4 seconds.
3.
Do not pull the fingers individually as this can
damage the glove and the hand.
8.
Hold down the program switch for four sec-
onds to exit glove donning mode and begin
using the hand.
2.
Roll up the base of the glove and pull the
whole glove off from the back of the hand.
4.
Exit glove donning mode by pressing and
holding the program switch for four seconds,
the hand will automatically drive out of
glove donning mode and will be active in the
default grip.
15
Advertisement
Table of Contents
