Certification - K-array KU210 User Manual

KU210
11. TEChNICAL SPECIFICATIONS
Power handling
Impedance
Frequency range (-10 dB)
SPL 1W/1mt
Maximum SPL
Horizontal
Vertical
Frequency
Connectors
Wiring
Dimensions
Weight
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
2 x 160 W
4 / 16 Ω selectable (2 x 8 Ω)
40 Hz – 150 Hz
94 dB
(2)
121 dB (cont.) – 127 dB (peak)
COVERAGE
omni
omni
CROSSOVER
Type External crossover required
Low pass @ 150 Hz
TRANSDUCERS
Type 1 x 10" neodymium magnet woofer with 2" voice coil
Type 1 x 10" passive transducer
POWER AUDIO IN/OUT
1 x 4-pin phoenix connector
Serial or parallel
RECOMMENDED AMPLIFIERS
Type KA24, KA84

CERTIFICATION

IP 54 (More complete water protection with K-KUIP accessory)
PHYSICAL
50.0 cm x 28.2 cm x 15.0 cm (19.7" x 11.1" x 5.9")
11 kg (24.3 lbs)
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
(1)
(3)
Ver. 1.4
14