Download Print this page

Makita EH 620 Instruction Manual page 4

Makita trimmer user manual

Advertisement

Starting up the Hedge Trimmer
-
Please make sure that there
are
children
or
other people within a
working range
o f
50
feet or
15
meters
(5),
also pay attention
to any
animals in the working vicinity
-
Before operating, always c h e c k that t h e Hedge
Trimmer i s s a f e for operation:
Check the security
of
the throttle lever. The throttle lever should
be
checked for smooth and easy action. Check for proper functioning
of
the throttle lever lock. Check for clean and dry handles and test
the function
of
the STOP switch. Keep handles free
of oil
and fuel.
Start t h e Hedge Trimmer only in accordance with the instructions.
Do not u s e any other methods for starting the engine (6)l
-
Use
the Hedge Trimmer only for applications specified.
-
Start the Hedge Trimmer enjine only after the entire assembly
is
done. Operation
of
the Hedge Trimmer i s permitted only after
all
t h e appropriate
accessories
a r e attached!
-
Before starting, make sure that the cutter blade will not contact
any objects such
as
branches, stones,
elc.
-
T h e engine
i s
to b e stopped immediately
if
there a r e any engine
problems.
-
When working with the Hedge Trimmer, keep both hands on
handles always wrap your fingers tightly around the handle,
keeping the control handle cradled between your thumb and
forefinger, Keep your hand in this position to have your machine
under control a t
all
times. Make sure your control handle i s in
good condition and
free o f
moisture, pitch,
oil
or grease.
Always e n s u r e
a safe,
well-balanced footing
-
Only
use
outdoors.
-
Operate the Hedge Trimmer in such
a
manner
as
to avoid inhalation
of the exhaust gases. Never run the engine in enclosed rooms (risk
of
suffocation and gas poisoning). Carbon monoxide
i s
a n
odorless
gas. Always ensure there
i s
adequate ventilation.
-
Stop the engine when resting and when leaving
the
Hedge Trimmer
unattended. Place it in a safe location to prevent danger to others,
setting fire to combustible materials
or
damage to the machine.
-
Never lay down the hot Hedge Trimmer onto dry grass
or
onto any
combustible materials.
-
Never operate the engine with a faulty exhaust muffler.
-
Stop the engine during transport
(7).
-
Secure the tool properly before transporting in vehicle to avoid fuel
leakage.
-
W h e n transporting the Hedge Trimmer ensure that the fuel tank
is
completely empty to avoid fuel
leakage.
Refuelling
-
To reduce t h e
risk
of fire and bum injury; handle fuel with care. It
is
highly flammable.
-
Stop the engine before refuelling
(7),
keep well away from open
flame
(8)
and
do
not smoke.
-
Do not attempt to refuel
a
hot or a running engine.
-
Avoid skin contact with petroleum products. Do not inhale fuel
vapor. Always wear protective gloves during refuelling. Change
and clean protective clothing at regular intervals.
-
Take care not to spill either fuel or oil always wipe unit dry before
starting engine. Allow wet cloths to dry before disposing in
proper, covered container to prevent spontaneous combustion.
-
Avoid any fuel contact with your clothing. Change your clothing
immediately
if
fuel h a s been spilled on it (danger hazard).
-
Inspect the fuel c a p at regular intervals making sure that it stays
securely fastened.
-
Carefully tighten the locking screw of the fuel tank. Move at
lease
10 ft
(3
meters) away from the refuelling point before starting engine.
-
Never refuel in closed rooms. Fuel vapors accumulate a t ground
level
(risk of
explosions).
-
Only transport and store fuel in approved containers. Make sure
stored fuel
i s
not accessible to children.
-
When mixing gasoline with two-cycle engine
oil,
use only gasoline
which contains no ethanol or methanol (types of alcohol).
This will help to prevent damage to fuel lines and other engine parts.
-
Make
sure the unit is properly assembled and in good operating
condition.
-
I
-
-
_
_
_
-
-
'
STOP
0
Resting
Transporting
Refuelling
w
I
' I
I
Maintenance
Tool Replacement
(7)
n - 1 \
,
'-
4

Advertisement

loading

This manual is also suitable for:

Eh 450