Download Print this page

Makita EH 620 Instruction Manual page 18

Makita trimmer user manual

Advertisement

WHAT I S NOT COVERED UNDER THIS WARRANTY
This warranty does not cover any emission-related part which malfunctions,
fails, or
i s damaged d u e to alterations and/or modifications such as changing, adding, or
removing parts.
When a n engine is being serviced under warranty, Makita U.S.A., Inc. and a n y of its
authorized dealers, distributors, or warranty stations shall not
be liable
for any
loss
of u s e of the engine, for any damage to
goods,
or loss of
time or inconvenience.
This
limited warranty also does not apply to any emission-related part which
malfunctions, fails, or is damaged d u e to failure to follow the maintenance and
operating instructions specified in the
1995
and later Owner's Manual including:
(a) Improper or inadequate maintenance of any warranted emission-related part.
(b)
Improper installation, adjustment,
or
repair
of
the engine
or any warranted
emission-related part unless performed by a factory authorized warranty station.
(c) Failure to u s e recommended fuel as specified in the
1995
and later Owner's
Manual.
(d)
Repairs and diagnosis performed outside of a n authorized warranty station.
(e) Use of parts which are not authorized by Makita U.S.A., Inc.
MAINTENANCE SCHEDULE
The engine owner
is responsible for having all scheduled inspection a n d
maintenance services performed at the intervals specified in the
1995
and later
Owner's Manual a n d to retain records of t h e s e services as having been performed.
These records
should be
transferred to each subsequent owner of the engine.
Makita U.S.A., Inc., cannot deny
a claim solely because there a r e no records of
scheduled maintenance; however, a warranty claim may
be
denied
if
the failure to
perform the scheduled maintenance and inspection resulted in the failure of a
warranted emission-related part.
As
a minimum, the engine owner is responsible
for
t h e
scheduled inspection and maintenance
described
below which a r e
based
on
the procedures
described
in the Owner's Manual.
PROCEDURE
INTERVAL
(a) Check all nuts and bolts and tighten as necessary
Every
8
hours of use or daily.
(b)
Check air passages and engine cylinder fins for clogging. Every
8
hours of use or daily.
(c) Clean air cleaner.
Every
8
hours of use or daily.
(d)
Check the spark plug. Clean and adjust it
if
necessary.
Every
8
hours of use or daily.
(e) Check the muffler exhaust port. Clean it
if
necessary.
Every
50
hours of use or monthly.
(9
Check the fuel filter. If clogged, replace it
with
new filter.
Every
50
hours of use or monthly.
(9)
Replace fuel lines.
Every
200
hours of use or annually.
(h)
Overhaul the engine.
Every
200
hours of use or annually.
Remove all obstructions as necessary.
(i)
Replace the packings and gaskets.
-
Every time the engine is reassem bled.
,
I Q

Advertisement

loading

This manual is also suitable for:

Eh 450