Advertisement
11. White Balance Adjustment
Adjust to the proper white balance level.
If it is not correct, the color reproducibility of the LCD panel will
be poor.
Mode
Record
Color bar signal whose chroma and
Signal
burst signals are turned off
Measurement Point
Check on the LCD display
Measuring Instrument
D
Adjustment Page
B3 (SUB BRIGHT R),
Adjustment Address
B4 (SUB BRIGHT B)
Specified Value
The display should not be colored
Adjusting method:
1)
Release the protect.
Page: 1, address: 00, data: 01
2)
Check that the LCD display is not colored. If it is, change
the data of address: B3 and address: B4 of page: D, and
adjustment the display is not colored.
3) Press the PAUSE button of the adjusting remote
commander.
7-14
Advertisement
