Advertisement
(1) Lift up the viewfinder.
(2) Align the right side of the battery pack with the white line on the camcorder, and slide the battery
pack to the right.
To Remove the Battery Pack
(1)
Lift up the viewfinder.
(2) While pressing BATT, slide the battery pack to the left.
8
Make sure that the power source is installed.
(1)
While sliding the lid lock in the direction of the arrow, lift up the lid.
(2) Press EJECT. The cassette compartment automatically lifts up and opens.
(3) Insert a cassette with the window facing out.
(4) Close the cassette compartment by pressing the "PUSH" mark on the cassette compartment.
(5) After the cassette compartment has gone down, close the lid.
To Eject the Cassette
While sliding the lid lock in the direction of the arrow, lift up the lid of the cassette holder and press
EJECT.
Preventing Accidental Erasure
To prevent accidental erasure, slide the tab on the cassette to expose the red mark. If you try to record
exposed, the q and & indicators flash in the viewfinder, and you cannot record.
with the
red mark
To rerecord on this tape, slide the tab back out covering the red mark.
9
Advertisement
