Advertisement
5. VCO Adjustment (PD-53 board)
Set the free running frequency of the VCO.
If it is not correct, the image will waver.
Mode
Adjusting method:
1) Release the protect.
Page: 1, address: 00, data: 01
2) Change the data of page: D, address: B6 and adjust the
frequency to the specified value.
3) Press the PAUSE button of the adjusting remote
commander.
6. Horizontal Display Posltlon Adjustment
Adjust the position of the image.
If its position is not correct, it will slip to the right or left.
Mode
Record
Signal
Color bar
Measurement Point
Measuring Instrument 1 Oscilloscope
Adiustment Page
ID
Adjustment Address
BA (I-I POSITION)
Specified Value
Adjusting method:
Release the protect.
Page: 1, address: 00, data: 01
Change the data of page: D, address: BA, and adjust the
delay time (T) to the specified value.
Press the PAUSE button of the adjusting remote
3)
commander.
CH2
CH2
7-11
Enlargement
Fig. 7-3-34.
Advertisement
