Advertisement
q
Lid lock (p. 9)
•i Power zoom button (p. 13)
q
Eject button (under the cover) (p. 9)
q
BRIGHT dial (p.
11)
q
PUSH OPEN button (p. 11)
q
below.)
Hooks for shoulder strap (See
compartment (p. 9)
q
Connect an optional external microphone.
This jack also accepts a "plug-in-power"
microphone.
q
RFU DC OUT (RFU adaptor DC output) jack
Attach the supplied shoulder strap to the hooks for the shoulder strap (a).
q
Audio/Video jacks (p. 27)
q
Jack cover
q
System. The U control jack is used for
controlling the tape transport of video
equipment and peripherals connected to it.
This jack has the same function as the jack
indicated as CONTROL L or REMOTE.
q
q
Grip strap (p. 14)
q
Lithium battery compartment (p. 30)
The buttons that have the same name on the Remote Commander as on the camcorder function
identically.
q
Transmitter
Point toward the remote sensor to
control the camcorder after turning on
the POWER switch on the camcorder.
q
Tape transport buttons
q
jDlSPlAY button
Press to erase the screen indicators
on the LCD screen. To display
the indicators, press again.
The indicators don't appear on the TV.
Preparing the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA
(R6) batteries.
(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the battery cover back onto the Remote Commander.
q
Size AA (R6) battery holder
q
START/STOP button
q
Power zoom button
The zooming speed is unchangeable in the
Remote Commander.
Advertisement
