Table of Contents
Advertisement
64
PROGRAMMING MODE - TEST MODE
6. Password -
How to change the password.
Entering set up
mode.
You will see LqC1
NOTE
• Default password is 3.
If you want to change the password, you must know the present password.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) button until
the display.
Set up the number you want
By pressing 75°C (167°F) or the 60°C (140°F) button.
For example, If you want to change password number
to No5
Press the 75°C (167°F) button until "
in the display.
Press the Start button, then Password change is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
Button
appears in
" appears
Display
Advertisement
Table of Contents
