Table of Contents
Advertisement
6. Password -
How to change the password.
Entering setup
mode.
You will see LqC1
NOTE
• Default password is 3.
If you want to change the password, you must know the present password.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm button until
display.
Set up the number you want
By pressing Warm or the Cold button.
For example, If you want to change password number
to No. 5.
Press the Warm button until
display.
Press the Start button, then Password change is done.
is displayed.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type – Push the Hot button twice.
PROGRAMMING MODE - TEST MODE
PROGRAMMING MODE - TEST MODE
Button
appears in the
appears in the
Display
appears
65
65
Advertisement
Table of Contents
