Switch Action; Kerf Board - Makita LS1020 Instruction Manual

Switch action
To prevent the trigger from being acciden-
tally pulled, a lock-off button
is
provided
as
a
safety feature.
To start the tool, press in the lock-off
button and pull the trigger. Release the
trigger to stop.
CAUTION :
0
Before plugging in the tool, always check to see that the trigger switch actuates properly
When not using the tool, remove the lock-off button. This prevents unauthorized opera-
and returns to the "OFF" position when released.
tion.
Kerf board
This tool i s provided with the kerf board
in the turn base. I f the kerf groove has not
yet been cut in the kerf board by the
factory, you should cut the groove before
actually using the tool to cut a workpiece.
Switch on the tool and lower the blade
gently to cut a groove in the kerf board.
8