TDK Sound Cube User Manual page 20

USING AN EXTERNAL UNIT CONNECTED TO THE LINE IN OR RCA JACKS
1a
To use the LINE IN Jack: Insert one
end of an audio cable into the
AUX/LINE OUT jack on your external
audio unit and the other end into the
LINE IN jack on the rear of this unit.
2
SOURCE EQ
Turn this unit on by rotating the Volume/
Power control until a click is heard and
the Power indicator lights to turn the
unit on.
NOTE:
Refer to the owner's manual of the external unit for detailed connection instructions.
OPERATION (CONTINUED)
20
1b
To use the RCA IN Jacks: Connect a left
and right audio cable from the Left/
Right jacks of your external unit to the
RCA IN Left/Right jacks on the rear of
this unit.
3
1
SOURCE EQ
1 2
Press the Source button/indicator u; the
Source menu will appear in the display.
Select AUX1 (if using LINE IN Jacks) or
AUX2 (if using the RCA IN jacks) using
the Select control v, and then press the
OK button w to confirm. Start playback
of the external device.
Adjust the Volume and EQ as described
on page 9.
3
O ®p n
3 4 5
2