Advertisement
Advertisement
Table of Contents
Related Manuals for TDK Tremor S-150
Summary of Contents for TDK Tremor S-150
- Page 1 • •...
-
Page 2: Safety And Care Instructions
Do not use liquid or aerosol cleaners. SERVICING - Do not service the system yourself. Servicing should be left for qualified personnel. For additional assistance call TDK Customer Care (1-866-629-3893). INSTALLING - Turn off all power to your computer and peripherals before plugging your system in. -
Page 3: Package Checklist
Tremor has a wide sweet spot "beaming" of conventional multimedia speakers and create that covers the entire room! a wider sonic "sweet spot." TDK Tremor systems add an exciting new sonic dimension to computer games, music listening, movies and multimedia presentations. When... - Page 4 QUICK SET -UP AND GO Attach desired stands to satellites. (S-150 and S-80 only) Place speakers in their desired spot. Connect all speaker cables to subwoofer. Connect sound source to subwoofer. Plug in subwoofer to any wall outlet and switch ON. Start your application and turn up the volume! SATELLITE PLACEMENT •...
- Page 5 Place the cable from the satellite into the recessed groove under the desktop stand. OPTION 2 - Monitor or Wall placement TDK Tremor satellites can be attached to a computer monitor, wall or other object using the supplied double stick tape.
-
Page 6: Subwoofer Placement
SUBWOOFER PLACEMENT • Place the subwoofer on the floor for best results. • Place subwoofer parallel and cornered near a wall. • Reflections from floors and walls help reinforce low-end frequencies. • If floor placement is not feasible, place on a table or REMEMBER: desktop. - Page 7 Connect the green stereo mini-plug cable to the line IN connection of the subwoofer. Connect the other end of the cable to the line out of your soundcard or other audio device. If connecting the speaker system to a receiver or other component that uses RCA jacks, use a mini-plug - to - RCA “Y”...
- Page 8 CONTROLS Power Switch: Turns the power ON and OFF. Located on the back of the subwoofer Power Indicator: Indicates when the system is ON or in Sleep mode. SLEEP MODE When the unit is powered ON, a green light will glow. If the unit is ON but not used for a while, a red light will indicate “sleeping.”...
-
Page 9: System Specifications
SYSTEM SPECIFICATIONS COMMON SOUNDS IN DECIBELS... -
Page 10: Troubleshooting
• high enough in the Control Panel menu of your computer. NOISE OR HISS: If the volume of the TDK Tremor is set too high or • to maximum, turn the volume of the system down to halfway and raise the output level of the computer or audio device. -
Page 11: Warranty
If the Product is discontinued and no longer available, then it may be replaced with Product determined by TDK to be of similar value and perf o rm a n c e . TDK does not warrant that the operation of the Product will be uninterrupted or error free. - Page 12 REGISTERING For added support and more updates, please register your Tremor speakers at www.TDK.com/speakers.