Cycle Guide - Maytag MGDC215EW0 Use And Care Manual

CYCLE GUIDE-- SENSOR DRY/AUTOMATIC DRY CYCLES
SENSOR DRY/AUTOMATIC DRY = Senses moisture in the load or air temperature and shuts off when the load reaches the selected
dryness level. Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
eros to dry: Dryness Level: ture
. Fabric:
Jeans, heavy work clothes
towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
More Dry
Energy Preferred
Less Dry
More Dry
Energy Preferred
Less Dry
More Dry
Energy Preferred
Less Dry
High
Medium or
Low
Low
AvailabJe Options: le Details:
End of Cycle Signal
Wrinkle Control
End of Cycle Signal
Wrinkle Control
End of Cycle Signal
Wrinkle Control
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
i fabric type, load size, and dryness setting.
Select a drying temperature based on the
i fabrics in your load. if you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
NOTE: if loads do not seem as dry as you would like, select More Dry next time you dry a similar load. if loads seem drier than you like,
select Less Dry next time you dry a similar load.
CYCLE GUIDE-- TIMED DRY CYCLES
TIMED DRY = Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
f items to dry: Cycle: Temperature: Available Cycle DetaiJs:
Options:
Completes drying if items are still damp. Heavy or bulky Heavy Dry Any End of Cycle Signal
items
Any load Freshen Up Any End of Cycle Signal Use low to medium temperature to smooth
out wrinkles, such as those found in
clothes packed in a suitcase or in items
wrinkled from being left in the dryer too
long.
Any load Damp Dry Any End of Cycle Signal Dries items to a damp level or for items
that do not require an entire drying cycle.
Rubber, plastic, heat Air Fluff Air Fluff End of Cycle Signal No heat drying.
sensitive fabrics
Setting the Drying Temperature
if your dryer has multiple heat settings:
A High temperature setting may be used for drying heavyweight
items such as towels and work clothes.
A Low to Medium temperature setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use the Air Fluff (no heat) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
6