Advertisement
Installing universal shank jig saw blade
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing
the blade.
If the universal blade clamp is used, you
can use blades of other makes which have
a
universal shank like the one shown in
the figure, with a blade width of 6.35 mm
(1 /4").
Insert the blade into the blade holder as far
as
it
will go. Make sure that the end of the
blade shank reaches the bottom of the
inner s l i t and tighten the bolt securely with
the hex wrench.
T h e end
of
t h e
blade
shank should reach t h e
6
Advertisement
