Zenoah BCZ5050DW Owner's Manual
  1. Manuals
  2. Brands
  3. Zenoah Manuals
  4. Brush Cutter
  5. BCZ5050DW
  6. Owner's manual

Zenoah BCZ5050DW Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BCZ5050DW
115 60 05-26 (307)
OWNER'S MANUAL
BRUSHCUTTERS
BCZ5050DW

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BCZ5050DW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Zenoah BCZ5050DW

Summary of Contents for Zenoah BCZ5050DW

  • Page 1 BCZ5050DW 115 60 05-26 (307) OWNER’S MANUAL BRUSHCUTTERS BCZ5050DW...

  • Page 2: Table Of Contents

    BCZ5050DW Contents SAFETY FIRST Instructions contained in warnings within this 1. Parts location............2 manual marked with a symbol concern critical 2. Specifications ...........3 points which must be taken into consideration to 3. Warning labels on the machine ......4 prevent possible serious bodily injury, and for this 4.

  • Page 3: Specifications

    Height 9.2 ✱ Dry Weight Engine Model GZ50N Displacement 50.6 Carburetor Diaphragm Fuel Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) Fuel Tank capacity litter 0.80 Service range 7000~11000 Spark plug NGK CMR7H Clutch system Two-shoe Centrifugal-Type...

  • Page 4: Warning Labels On The Machine

    BCZ5050DW 3. Warning labels on the machine (1) Read owner’s manual before operating this machine. (2) Wear head, eye and ear protection. (3) Wear foot protection. (4) Wear gloves. (5) Beware of thrown objects. (6) Warning / Attention (7) Keep all children, bystanders and helpers 15 meters away from the machine.

  • Page 5: For Safe Operation

    BCZ5050DW 5. For safe operation when weather conditions might make WARNING it unsafe to use the product. • A brushcutter or trimmer can be 3. Wear the following protective dangerous if used incorrectly or equipments when operating the carelessly, and can cause serious or product.
  • Page 6 1. Each time before starting the engine, fully back, turn off the engine and take inspect the entire unit to see if every the unit to your authorized ZENOAH part is in good order and is securely servicing dealer for repair.
  • Page 7 BCZ5050DW 5. For safe operation using your whole hand. Place your feet 2. Eliminate all sources of sparks or flame slightly apart (slightly further apart than (i.e. smoking, open flames, or work that the width of your shoulders) so that...
  • Page 8 Use special care around the fuel line, the muffler, and the ignition wiring. 4. When replacing the any other part, or any lubricant, always be sure to use only ZENOAH products or products which have been certified by ZENOAH for use with the ZENOAH product.

  • Page 9: Set Up

    BCZ5050DW 6. Set up ■ ENGINE ■ BLADE Using attached 4 socket screws, secure the connection 1. Put the angled bar(1) into the side holes of the inner firmly with equal force. holder and the gearcase. 2. Remove the nut (Lefthanded) and the outer holder(3) from the gearshaft.

  • Page 10: Fuel

    ■ FUELING THE UNIT formulated for air-cooled 2-cycle gasoline engine 1. Untwist and remove the fuel cap. Rest the cap on a use. If Zenoah oil is not available, use an anti- dustless place. oxidant added quality oil expressly labeled for air- 2.

  • Page 11: Use

    BCZ5050DW 8. Use ■ STARTING THE ENGINE ■ ADJUSTMENTS Take care that the cutting head will start rotating upon Throttle cable: the engine starts. The normal play (1) of the throttle cable (2) is 1 or 2mm when measured at the carburetor side end.

  • Page 12: Maintenance

    BCZ5050DW 8. Use 9. Maintenance • Choose a suitable recommended cutting attachment WARNING according to the object to be cut. Never use other Before cleaning, inspecting, or repairing the unit, cutting attachment not approved by Husqvarna make sure that the engine has stopped and is cool.
  • Page 13 BCZ5050DW 9. Maintenance ■ BLADE ■ GEARCASE Check the blade and the fasteners for looseness, • Supply multi-purpose grease at every 25 hours of cracking, or bending. use. • Remove the bolt of the grease nipple and the bolt ■ AIR FILTER opposite side of the grease nipple.

  • Page 14: Troubleshooting Guide

    When your unit seems to need further service, please consult with our ZENOAH service shop in your area. 11. Disposal • When you dispose of the machine, do not disassemble the machine.

  • Page 15: Limited Warranty

    OTHER ENGINE COMPONENTS CAUSED BY THE period, the failed part will be replaced or repaired free FAILURE OF A WARRANTED PART STILL UNDER of charge by a ZENOAH authorized dealer. WARRANTY. WARRANTY PERIOD: Six (6) months after purchased THE WARRANTY DOES NOT APPLY TO THOSE...
  • Page 16 Head Office: 1-9, Minamidai, Kawagoe-city, Saitama, 350-1165 Japan Telephone: (+81)49-243-1117 Telecopier: (+81)49-243-7197...

Table of Contents