JVC RS-WP1WT Service Manual page 16

RS-WP1WT
Removing the flywheel (See Fig. 7 and 8)
1. Remove the head amplifier & mechanism control P.C.
board.
2. Remove the main motor assembly.
3. After turning over the cassette mechanism, remove
the two slit washers 1 and fixing the capstan shafts R
and L, and pull out the flywheel R and L respectively
from behind the cassette mechanism.
Flywheel R
Removing the mecha braket reel pulse
P.C. board and solenoid (See Fig. 9 and
10)
1. Remove the screw C attaching the mecha braket
assembly on the cassette assembly.
2. Remove the screw D attaching the reel pulse board.
3. Remove the five pawls a to e reattaining the reel
pulse board.
4. From the surface of the reel pulse board parts,
remove the two pawls f and g retaining the solenoid.
Solenoid
1-16
Flywheel L
Fig. 8
g
f
Flywheel R
Capstan shaft R
Slit
washer 1
Mecha braket assembly
a b c d
Fig.10
Flywheel L
Capstan shaft L
Slit
washer 1
Fig. 7
C
Fig. 9
Reel pulse board
e
D