Wired Connection(Mac Version) - HitachiSoft StarBoard FX-77G User Manual

StarBoard FX-77G/FX-63G/FX-82WG

2.2.2 Wired Connection(Mac version)

(1) Connect devices following the page 1-11.
(2) Power up the projector.
(3) Power up Mac to start up Mac OS.
(4) Adjust the position of the projector so that the Mac screen projected by the
projector is within the pen input active area (see page 1-4).
(5) Select "Go" → "Applications" → "StarBoard Software" to start StarBoard
Software.
(6) Select "MENU" on the StarBoard Software toolbar → "Settings" → "StarBoard"
→ "Check Connection," and then check the connection.
If the "StarBoard is not connected" message appears, StarBoard Software has not
detected the StarBoard. Check whether the StarBoard and Mac are connected properly.
If they are connected properly, the "StarBoard is connected" message appears. If the
indication does not change even though you have checked the connection, there is
likely to be some problem.
If the positions of the pen tip and cursor are out of alignment, select "MENU" on the
StarBoard Software toolbar → "Settings" →"StarBoard" → "Calibrate" → "OK". and
then perform position alignment.
Connected
2-6
No Connection
Usage
English