Usage; Basic Usage; Preparation - HitachiSoft StarBoard FX-77G User Manual

StarBoard FX-77G/FX-63G/FX-82WG

2. Usage

2.1 Basic Usage

In this chapter, the basic usage of the StarBoard will be explained.
Read this section carefully to learn about the StarBoard functions.

2.1.1 Preparation

Prepare to use the StarBoard.
(1) Insert the battery into the electronic pen.
CAUTION
Be sure to install batteries correctly.
Do not install batteries with positive and negative terminals reversed, or use
batteries other than the type specified. It will cause pen malfunctions and excess
heat, or burns to the hand.
Be sure to provide insulation during disposal.
Be sure to insulate the positive and negative terminals of the battery using
cellophane tape, or similar material when disposing of batteries. Disposing of
batteries without insulating them may lead to overheating, bursting, or ignition due
to shorting, resulting in personal injury or fire. Furthermore, be sure to follow all
local rules and regulations regarding proper battery disposal. If within the EU, be
sure to follow Batteries Directive.[Batteries directive (2006/66/EC)]
(1) Open the battery cover on the
electronic pen by moving in the
direction of the arrow.
(2) As shown in the figure, insert the
battery after verifying that the "+"
side faces to the pen tip.
(3) Replace the battery cover and slide
it in the direction of the arrow until
it closes completely.
2-1
Usage
English