Assembly And Setup; Stand Setup Method - HitachiSoft StarBoard FX-77G User Manual

StarBoard FX-77G/FX-63G/FX-82WG

1.4 Assembly and Setup

When setting up the StarBoard, keep the following in mind:
• Select a level and stable position.
• Do not set it up near equipment that might generate electromagnetic waves and radio
frequencies (e.g. radio transmitter, television, copying machine, air conditioner).
• Avoid locations that are dusty, that are subject to extremely high or low temperature or
humidity or that are exposed to direct sunlight.

1.4.1 Stand Setup Method

Reconfirm that all parts are present before assembling and setting up the stand.
(1) Stand Assembly
CAUTION
Fasten the screws tightly.
Otherwise, the stand might fall and cause injury or the impact of the falling board
might cause damage.
Assemble the stand according to the following diagram. Numbers in the diagram
correspond to numbers in the parts list on page 1-3.
(7)
Long Short
Align both feet with the
longer side facing forward
(1)
(4)
(9)
(5)
(6)
(9) (2)
Fasten with a
Phillips screwdriver.
(3)
(8)
1-6
Contents
(7)
Fasten with an
Allen wrench.
English