Basic Operation Of Electronic Pen; Electronic Pen Setting - HitachiSoft StarBoard FX-77G User Manual

StarBoard FX-77G/FX-63G/FX-82WG

2.1.3 Basic operation of Electronic Pen

In the default settings of the electronic pen, the pen tip button is set to the left button of
the mouse in Windows and the main button click in Mac. You can use the pen tip button
to perform the following mouse operations while Windows or Mac is running.
The following xxxx/xxxx description is for functions and operations in a Windows
environment or Mac environment.
• Left click / Primary mouse button click
Push the pen tip onto the StarBoard with sufficient force and then release the pen
away from the board.
• DoubleClick / Primary mouse button Double click
Perform the "Click" operation explained above twice in the same spot.
• Drag / Drag
Push the pen tip onto the starboard with sufficient force, and without releasing it away
from the broad, move it from one point to another.

2.1.4 Electronic Pen Setting

The electronic pen has one pen tip button, and two side buttons. Mouse actions can be
assigned to these three buttons. The default button settings are summarized in the
following table.
Button Name
Pen tip
Side Button No.0
Side Button No.1
Pen tip
* The assignment of the side button can be changed by selecting "MENU" on the
StarBoard Software toolbar → "Settings" → "StarBoard" → "StarBoard Settings" →
"Configure pen buttons" (This function can only be changed in Windows.)
Windows *
Left click of mouse
Hovering
Right click of mouse
Side Button No.0
2-3
Function
Mac
Primary mouse button click
Hovering
Secondary Button click
Side Button No.1
Usage
English