Craftsman 5818.3 Operator's Manual page 12

This product will accept Craftsman 19.2V C3 lithium-ion battery packs. For
complete charging instructions, refer to the Operator's Manual for the battery
pack and charger.
,_, WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling parts,
making adjustments, installing or removing blade, cleaning, or when it is not
in use.
TO ATTACH BATTERY
PACK (Fig, 2)
1. Ensure that the trigger switch
is in the "OFF" position.
2. Align the raised rib on the
battery pack with the groove
inside the reciprocating saw,
and then insert the battery
pack into the tool.
NOTICE: Make sure that the
latch on the battery pack snaps
into place and the battery pack
Battery- Rib_ atch
Release Button
is secured to the tool before beginning operation. Improper assembly of the
battery pack can cause damage to internal components.
TO DETACH BATTERY PACK (Fig. 2}
1. Ensure that the trigger switch is in the "OFF" position.
2. Depress both battery-release buttons, located on the sides of the battery
pack, to release the battery pack.
3. Pull the battery pack out and remove it from the tool.
TRIGGER SWITCH (Fig. 3)
To turn the reciprocating saw ON,
depress the lock-off button and
then squeeze the trigger switch.
To turn it OFF, release the trigger
switch and allow it to return to the
"OFF" position.
Fig. 3 Variable-Speed
Trigger Switch Lock-off Button
12