Siemens SXG 75 Service Manual page 31

9.1 Window explanation
This general explanation is valid for all SW-Update channels
(Personal
Repair,
1.1.1.1.1.1.3 Automatic read
out function of phone
type/Variant. Appearing in the
window above.
Remarks:
In case of malfunction please check
o Is the correct phone type selected
o Is the correct COM-Port selected
o If a variant is missing, move back to Settings select the missing variant and
conncet the GRM Server. Then continue with SW-Update.
Technical Documentation
TD_Repair_L1-L3_SXG75_R1.1.pdf
Operator SWAP, Operator
After using „Check Variant" Phone IMEI-
Number will be shown here
Select boxes for:
Content = xfs
Settings = mapping
Attention:
Activation of the boxes
will
customer date while SW-
Update
Company Confidential
2005©BenQ
SWUpdate)
cause erase of
Release 1.1
Window to select the mobile
phone CPU
Shows the different SW –Versions
a) SW inside the mobile phone
b) Version of Service Release Table
SW
c) Version of Master Table SW
Start button
Update
Stop / leave SW-Update
11/2005
Page 31 of 61
for SW-