Charging the Battery
RDX Series™ offers two types of chargers :
•
Standard Charger and,
•
Rapid Charger.
The radio comes equipped with a Standard
Charger.
To charge the battery (with the radio attached),
place it in a Motorola-approved Drop-in Tray
Single Unit Charger or Drop-in Tray Multi Unit
Charger.
Note:
When acquiring additional chargers or
power supplies, make sure you have similar
drop-in tray chargers and power supplies
sets (all "rapid" or all "standard"). For part
number details, refer to "Chargers" on
page 86.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Charging with the Drop-in Tray
Single Unit Charger (SUC)
Drop-in Tray
Charger Port
1.
Place the drop-in tray charger on a flat surface.
2.
Insert the connector of the power supply into the
port on the side of the drop-in tray charger.
3.
Plug the AC adaptor into a power outlet.
4.
Insert the radio into the tray with the front of the
radio facing the front of the charger, as shown.
Note:
When charging a battery attached to a radio,
turn the radio OFF to ensure a full charge.
See "Operational Safety Guidelines" on
page 7 for more information.
Power Supply
(Transformer)
25
English