Nuisance Channel Delete; Cps (Computer Programming Software) - Motorola RDX Series RDU2080d User Manual

NUISANCE CHANNEL DELETE

Nuisance Channel Delete allows you to
temporarily remove channels from the 'Scan
List'. This feature is useful when irrelevant
conversations on a 'nuisance' channel tie up
your radio's scanning features. To delete a
channel from the scan list:
• Start 'Scan Mode' by short pressing the SB2
button (*)
• Wait until the radio stops on the channel you
wish to eliminate, then long press the SB2
button to delete it.
• The channel will be removed until you exit
'Scan Mode' by pressing the SB2 button again
or if radio is turned OFF.
Note: (*)Assumes the SB2 button is not
programmed to another function different
from the default.
52
English
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
CPS (COMPUTER PROGRAMMING
SOFTWARE)
Radio to be
programmed
USB
Connector
Drop-in
Charger
Tray
Programming
Mini-connector
Cable
The easiest way to program or change features
in your radio is by using the Computer
Programming Software (CPS) and the CPS
Programming Cable(*). CPS Software is
available for free as web based downloadable
software at:
www.motorolasolutions.com/RDX
To program, connect the radio via the Drop-in
Charger Tray and CPS Programming Cable as
shown in the picture above.
CPS